Skip to content

CAPD347 Compatible Thermal Printer Mechanism

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347

The Uright UR347C is an 80mm direct thermal printer mechanism compatible with Seiko Instruments CAPD347. It provides a drop-in replacement while retaining your existing mounting arrangement, connectors, pin configuration, control board and firmware. With a 72mm printing width, 203 dpi resolution and an integrated automatic cutter, the UR347C is available for existing equipment and new printing projects. Standard supply includes the mechanism with cutter; a control board is not included.

Compatible Reference
Seiko CAPD347
Paper Width
79.5 ± 0.5 mm
Printing Width
72 mm
Maximum Printing Speed
250 mm/s
Resolution
203 dpi (8 dots/mm)
Cutter
Integrated automatic cutter

Tell us your quantity, interface and intended application.

PRODUCT OVERVIEW

CAPD347 Compatible Mechanism for Your Existing Equipment

If your equipment uses a Seiko Instruments CAPD347 thermal printer mechanism, the Uright UR347C provides a compatible option for mechanism replacement and ongoing supply. Compatibility covers the CAPD347 series, including models with different suffixes.

You can replace the mechanism while retaining the existing mounting arrangement, connectors and pin configuration, control board and firmware. This allows equipment manufacturers, service teams and spare-parts buyers to source an alternative mechanism for their existing CAPD347-based equipment.

Key Features of the UR347C

Direct Replacement for CAPD347

Maintain your existing equipment configuration when replacing a CAPD347 mechanism with the UR347C. The mounting arrangement, connectors, pin configuration, control board and firmware can be retained.

80mm Paper and 72mm Printing Width

The UR347C supports 79.5 ± 0.5 mm paper and a 72mm printing width, with 576 dots per line. Its 203 dpi resolution supports text, barcodes and graphics generated by the host system.

Printing Speed up to 250 mm/s

The mechanism has a maximum rated printing speed of 250 mm/s for receipt and ticket printing assemblies.

Integrated Automatic Cutter

A slide-type automatic cutter is included as standard. The cutter supports paper thicknesses of 50–90 μm, with a rated life of 1.5 million cuts.

Our cutter timing and service-life guide explains how to read the published cycle time, maximum cutting frequency and endurance figure together.

Direct Thermal Printing

The UR347C prints on thermal paper without an ink ribbon. Its curved paper path and platen latch support paper loading and handling within embedded printing assemblies.

Built-in Detection Components

The mechanism includes a head-temperature thermistor, a platen-position switch, a paper detector and a cutter-home-position detector for use by the equipment’s control system.

UR347C component diagram showing the platen roller, cutter, motors and paper detector

Applications and Replacement Sourcing

The UR347C can be integrated into POS receipt printers, self-service kiosks, ticketing terminals and other embedded printing assemblies. It is also available for servicing equipment already using a CAPD347 mechanism.

For an existing installation, send us the current mechanism model and equipment application. For a new project, share your paper width, installation requirements and expected quantity. Our team can discuss the mechanism and supply requirements by email or WhatsApp.

UR347C Datasheet and Technical Information

Review the UR347C technical specifications below for printing width, resolution, speed, power supply, dimensions and cutter information. If you are researching CAPD347 specifications or planning a compatible mechanism supply, contact Uright Tech for the UR347C datasheet, mounting drawings and connection details.

Share your current mechanism model or equipment requirements to discuss the UR347C for your application.

UR347C thermal printer mechanism mechanical dimensions and mounting drawing

UR347C is a Uright Tech product. Seiko Instruments and CAPD347 are referenced to identify compatibility.

FROM PRODUCT TO WORKFLOW

Explore related applications

TECHNICAL DETAILS

Specifications

These specifications describe the Uright UR347C mechanism. CAPD347 is the compatible reference model. Standard supply includes the mechanism with an automatic cutter; a control board is not included.

Product Information

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Product Information
BrandUright Tech
ModelUR347C
Product TypeDirect thermal printer mechanism with automatic cutter
Compatible ReferenceSeiko Instruments CAPD347 series

Printing

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Printing
Printing MethodDirect thermal line dot printing
Resolution203 dpi (8 dots/mm)
Dots per Line576
Printing Width72 mm
Maximum Printing Speed250 mm/s

Paper

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Paper
Paper Width79.5 ± 0.5 mm
Paper PathCurved
Supported Paper Thickness50–90 μm

Power Supply

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Power Supply
Logic Voltage (Vdd)2.7–5.5 V
Drive Voltage (Vp)21.6–26.4 V

Cutter

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Cutter
Cutter TypeIntegrated slide-type automatic cutter
Cutter Cycle TimeApprox. 0.5 s
Minimum Cutting Pitch10 mm
Maximum Cutting Frequency30 cuts/min

Detection

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Detection
Head TemperatureThermistor
Platen PositionMechanical switch
Paper DetectionPhoto interrupter
Cutter Home PositionPhoto interrupter

Dimensions & Weight

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Dimensions & Weight
Dimensions (W × D × H)105.1 × 35.4 × 27.2 mm
WeightApprox. 162 g

Reliability

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Reliability
Pulse Activation Life100 million pulses
Printhead Abrasion Life≥150 km
Cutter Life1,500,000 cuts

Operating Environment

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Operating Environment
Operating Temperature-10 to 50 °C

Supply Configuration

UR347C 80mm Thermal Printer Mechanism Compatible with CAPD347 — Supply Configuration
Standard SupplyPrinter mechanism with integrated automatic cutter
Control BoardNot included

BEFORE YOU ORDER

Compatibility & support

The UR347C supports direct replacement of Seiko Instruments CAPD347 mechanisms, including models with different suffixes. The existing mounting arrangement, connectors and pin configuration, control board and firmware can be retained. Standard supply includes the thermal printer mechanism and integrated automatic cutter. A control board is not included.

For mounting drawings, connection details or project support, email [email protected] or contact us on WhatsApp at +86 187 5023 0267. Please include your current mechanism model, equipment application and required quantity.

PRODUCT QUESTIONS

Frequently asked questions

1. Is the UR347C compatible with Seiko CAPD347?

Yes. The Uright UR347C is a compatible replacement for Seiko Instruments CAPD347 thermal printer mechanisms. Compatibility covers the CAPD347 series, including models with different suffixes.

2. Do I need to change the mounting, connectors or control board?

No. When replacing a CAPD347 mechanism with the UR347C, you can retain the existing mounting arrangement, connectors, pin configuration, control board and firmware.

3. What is included in the standard supply?

The standard supply includes the thermal printer mechanism with an integrated automatic cutter. A control board is not included.

4. What paper width and printing width does the UR347C support?

The UR347C supports 79.5 ± 0.5 mm paper and a 72mm printing width. Its resolution is 203 dpi, with 576 dots per line.

5. Does this mechanism require an ink ribbon?

No. The UR347C uses direct thermal printing on thermal paper and does not require an ink ribbon.

6. How can I obtain the UR347C datasheet and dimensions?

Contact Uright Tech by email or WhatsApp to request the UR347C datasheet, mounting drawings and connection details. Include your current mechanism model or project requirements so we can provide the relevant information.

7. How can I request a quote for a CAPD347-compatible mechanism?

Send your current mechanism model, equipment application and required quantity to [email protected] or contact us on WhatsApp at +86 187 5023 0267. If you are sourcing a mechanism for a new project, include your installation and printing requirements.

Related models